The INTENSO bowls are handmade in Germany and differ optically from the regular AEON bowls. They are produced in a small edition. The INTENSO bowls are treated with a patented process.
The original process was developed in collaboration with sommeliers in order to achieve a faster and rounder development of aromas in the wine. After a test phase, we at AEON were also able to determine the advantages of Intenso glasses for smoking. Some flavors can taste a little more rounded, different types of tobacco appear more balanced. Due to the comparatively short exposure time of smoke in a bowl, you shouldn't expect all the aromas to appear more effective. The results can also vary depending on the setup, tobacco type and flavor. For example, we were able to determine that there was no difference in some types of tobacco, while in others we found a clear difference in taste compared to normal shisha bowls.
The new AEON Shisha - Edition 4 is the successor to Edition 3 and has been developed and continuously tested for over a year. The AEON hookahs are produced in Germany under the highest quality requirements from V2A stainless steel (1.4305 V2A stainless steel from Switzerland) near Stuttgart and then every component of the AEON shisha is subjected to a strict quality control in our warehouse. The production of the shisha in Germany is carried out with the certification ISO 9001 and ISO 14001 and each thread is checked on site for its accuracy. The bowls of the AEON shisha are mouth-blown by hand and then checked for quality in our warehouse and glued with a high-quality 2-component adhesive. So when you buy an AEON hookah, you can be sure
Scope of delivery of Edition 4 - Premium
- Head adapter with M16x1 thread
- Charcoal plate (hand cut from V2A stainless steel)
- 18/8 cut to M16x1 adapter
- Smoke column below with 29/2 cut below (M14x1 thread inside) and 18/8 cut above
- Smoke column above with 18/8 cut
- Base with 4 connections including closed chamber and blow-out valve on the smoke column
- 4 x hose end pieces with shortened 18/8 cut including 11mm ball
- Pull-through reducer (can optionally be used to adapt the pull-through to a traditional shisha)
- 4 x sleeves including 6mm ball for blowing out
- 4 x patented APS (AEON Purge System) in the base, each consisting of 3 parts: ball seat for 11mm ball, spring and adjustable blow-out device
- Immersion tube above with M14x1 thread
- Immersion tube below with M14x1 thread (immersion tube length can be adjusted to suit the suit individually)
- Diffuser with M14x1 thread
- Bowl with thread
How does Edition 4 - Premium differ from other shishas?
The Edition 4 has the patented AEON Purge System (APS) which allows you to vent the smoke from the bowl without removing any balls from hose end pieces, so that you get the stale smoke from the bowl. The APS works via a spring that is pushed down into your hose when you blow it in, creating a space through which you can vent the smoke from the bowl. You can adjust the APS by turning the blow-out device in or out of the base. Screwed further into the base, the spring gets more tension and blowing out is more difficult, whereas blowing out is easier with a blow-out device that is turned out far. With Edition 4, we have also developed a new blow-out valve that guides the smoke upwards along the column of smoke. This prevents you from blowing the smoke out of the other hoses, instead of blowing it up along the column of smoke. This system also works if you attach other smoke columns to the Edition 4. We also offer other smoke columns that are compatible with the Edition 4 and can thus change the position of the blow-out valve. The entire technology of the APS and the blow-out valve is elegantly hidden in the base and hardly visible from the outside. The base has a 29/2 cut, which means you can customize the Edition 4 according to your wishes. For example, other smoke columns with 29/2 cut fit easily into the base and you can adjust the look of your hookah at any time. The smoke column included with the Edition 4, is first inserted into the 29/2 section of the base and then screwed to the dip tube with M14x1 thread. Since the smoke column has an 18/8 cut at the top, you can also attach a molasses catcher or other components with 18/8 cut and adjust the height of the Edition 4 according to your wishes. With the base adapter, which is available as an accessory, you can also easily attach smoke columns with M16x1 thread to your Edition 4 and thus make your Edition 4 even more individual.
How does Edition 4 - Premium differ from Basic?
The Edition 4 - Premium has a two-part smoke column, a divisible immersion tube and a draft reducer. With the two-part smoke column you can adjust the height of the Edition 4 - Premium and with the two-part dip tube you can adjust the volume in the bowl. The long immersion tube allows you to have more smoke in the bowl and is therefore particularly suitable if you often smoke with several people at the same time. If you only smoke alone or in pairs, you can shorten the dip tube and thus set a faster suit. The pull-through reducer can optionally be plugged into a hose end piece and reduces the pull-through on the hose end piece from 11mm to 7.5mm if you prefer a more traditional pull-through. You can also find other pull-through reducers in our shop as accessories.
Dimensions of the hookah:
Height: about 53 cm
Weight: 4.20 kg