Description
The INTENSO bowls are handmade in Germany and differ optically from the regular AEON bowls. They are produced in a small edition. The INTENSO bowls are treated with a patented process.
The original process was developed in collaboration with sommeliers in order to achieve a faster and rounder development of aromas in the wine. After a test phase, we at AEON were also able to determine the advantages of Intenso glasses for smoking. Some flavors can taste a little more rounded, different types of tobacco appear more balanced. Due to the comparatively short exposure time of smoke in a bowl, you shouldn't expect all the aromas to appear more effective. The results can also vary depending on the setup, tobacco type and flavor. For example, we were able to determine that there was no difference in some types of tobacco, while in others we found a clear difference in taste compared to normal shisha bowls.
The new AEON Shisha - Edition 4 is the successor to Edition 3 and has been developed and continuously tested for over a year. The AEON hookahs are produced in Germany under the highest quality requirements from V2A stainless steel (1.4305 V2A stainless steel from Switzerland) near Stuttgart and then every component of the AEON shisha is subjected to a strict quality control in our warehouse. The production of the shisha in Germany is carried out with the certification ISO 9001 and ISO 14001 and each thread is checked on site for its accuracy. The bowls of the AEON shisha are mouth-blown by hand and then checked for quality in our warehouse and glued with a high-quality 2-component adhesive. So when you buy an AEON hookah, you can be sure
Scope of delivery of the Edition 4 - Lounge
- Head adapter with M16x1 thread
- Charcoal plate (hand cut from V2A stainless steel)
- 18/8 cut to M16x1 adapter
- Smoke column with 29/2 cut at the bottom (M14x1 thread inside for fastening to the base) and 18/8 cut at the top
- Base with a connection including closed chamber and blow-out valve on the smoke column
- 1 x hose end piece with shortened 18/8 cut
- 4 x sleeves including 6mm ball for blowing out
- Immersion tube with M14x1 thread above and below
- Bowl with thread
How does the Edition 4 Lounge differ from other shishas?
With the Edition 4, we have developed a new blow-out valve that guides the smoke upwards along the column of smoke. This system also works if you attach other smoke columns to the Edition 4 (eg with the optional "base adapter"). We also offer other smoke columns that are compatible with the Edition 4 and can thus change the position of the blow-out valve. The entire technology of the blow-out valve is elegantly hidden in the base and hardly visible from the outside. The base has a 29/2 cut, which means you can customize the Edition 4 according to your wishes. For example, other smoke columns with 29/2 cut fit easily into the base and you can adjust the look of your hookah at any time. The smoke column included with the Edition 4, is first inserted into the 29/2 section of the base and then screwed to the dip tube with M14x1 thread. Since the smoke column has an 18/8 cut at the top, you can also attach a molasses catcher or other components with 18/8 cut and adjust the height of the Edition 4 according to your wishes.
How does the Edition 4 Lounge differ from the other Edition 4 variants?
The Edition 4 - Lounge is specially designed for use in shisha bars. Few components, a simple structure but a modern, simple design with a beautiful blow-out valve (as with the other Edition 4 variants) ensure that the Edition 4 Lounge is a real eye-catcher in every shisha lounge. We did not use a diffuser here, because in shisha bars one likes to hear the “bubbling” of the shisha. A suitable diffuser for the Edition 4 is however optionally available and can be attached to the dip tube of the Edition 4 - Lounge without any problems. The smoke column consists of one part and is left in the base by 29/2 grinding and then screwed firmly to the immersion tube, so that the Edition 4 - Lounge could also be worn on the entire smoke column. There is an 18/8 cut under the plate, so that the coal plate can be easily removed for a head change, for example. Molasse catchers could also be attached as required. A shorter dip tube could also be attached for the Edition 4, the dip tubes of the different variants are compatible with each other.
Dimensions of the hookah:
Height: about 53 cm
Weight: 4.20 kg
![AEON Shisha - Edition 4 - Lounge Azur [INTENSO]](http://cdn.shopify.com/s/files/1/0250/2171/0417/products/AEONShisha-Edition4-LoungeAzur_INTENSO_2000x.png?v=1593029552)